RF22::ModemConfig Struct Reference

Defines register values for a set of modem configuration registers. More...

#include <RF22.h>

Public Attributes
uint8_t	reg_1c
	Value for register RF22_REG_1C_IF_FILTER_BANDWIDTH.
uint8_t	reg_1f
	Value for register RF22_REG_1F_CLOCK_RECOVERY_GEARSHIFT_OVERRIDE.
uint8_t	reg_20
	Value for register RF22_REG_20_CLOCK_RECOVERY_OVERSAMPLING_RATE.
uint8_t	reg_21
	Value for register RF22_REG_21_CLOCK_RECOVERY_OFFSET2.
uint8_t	reg_22
	Value for register RF22_REG_22_CLOCK_RECOVERY_OFFSET1.
uint8_t	reg_23
	Value for register RF22_REG_23_CLOCK_RECOVERY_OFFSET0.
uint8_t	reg_24
	Value for register RF22_REG_24_CLOCK_RECOVERY_TIMING_LOOP_GAIN1.
uint8_t	reg_25
	Value for register RF22_REG_25_CLOCK_RECOVERY_TIMING_LOOP_GAIN0.
uint8_t	reg_2c
	Value for register RF22_REG_2C_OOK_COUNTER_VALUE_1.
uint8_t	reg_2d
	Value for register RF22_REG_2D_OOK_COUNTER_VALUE_2.
uint8_t	reg_2e
	Value for register RF22_REG_2E_SLICER_PEAK_HOLD.
uint8_t	reg_58
	Value for register RF22_REG_58_CHARGE_PUMP_CURRENT_TRIMMING.
uint8_t	reg_69
	Value for register RF22_REG_69_AGC_OVERRIDE1.
uint8_t	reg_6e
	Value for register RF22_REG_6E_TX_DATA_RATE1.
uint8_t	reg_6f
	Value for register RF22_REG_6F_TX_DATA_RATE0.
uint8_t	reg_70
	Value for register RF22_REG_70_MODULATION_CONTROL1.
uint8_t	reg_71
	Value for register RF22_REG_71_MODULATION_CONTROL2.
uint8_t	reg_72
	Value for register RF22_REG_72_FREQUENCY_DEVIATION.

Detailed Description

Defines register values for a set of modem configuration registers.

Defines register values for a set of modem configuration registers that can be passed to setModemConfig() if none of the choices in ModemConfigChoice suit your need setModemConfig() writes the register values to the appropriate RF22 registers to set the desired modulation type, data rate and deviation/bandwidth. Suitable values for these registers can be computed using the register calculator at http://www.hoperf.com/upload/rf/RF22B%2023B%2031B%2042B%2043B%20Register%20Settings_RevB1-v5.xls

---

The documentation for this struct was generated from the following file:

• RF22.h